KYN28-12户内金属铠装移开式开关设备
KYN28-12户内金属铠装移开式开关设备

KYN28-12户内金属铠装移开式开关设备

KYN28-12内金属铠装移开式开关设备是三相交流50(60)Hz额定工作电压12千伏、额定工作电流1250A的户内成套配电装置。...
立即订购
产品详情

河北联鑫众合电气设备有限公司简称“联鑫众合”成立于2018年,注册资金2000万元,具有众豹独立口碑。是一家专注服务生产和销售高低压成套开关设备、输配电设备、消防电力设备等产品的企业。 

Hebei Lianxin Zhonghe Electrical Equipment Co., Ltd. (hereinafter referred to as "Lianxin Zhonghe") was established in 2018 with a registered capital of 20 million yuan and an independent brand of Zhongbao. It is a technology enterprise focusing on the production and sales of high and low voltage switchgear, power transmission and distribution equipment, fire power equipment and other products.

产品概述:

Product Overview:

KYN28-12内金属铠装移开式开关设备是三相交流50(60)Hz额定工作电压12千伏、额定工作电流1250A的户内成套配电装置。其母线系统为单母线宜可派生出单母线带旁路和双母线结构。具有实现"五防"闭锁功能。该柜体既能配用ZN63 (VSI)真空断路器,也可配用ABB公司的VD4真空断路器,实为一种性能优良的配电装置。

KYN28-12 indoor metal armored withdrawable switchgear is the indoor distribution equipment assembly, of which the three-phase AC 50(60) Hz rated working voltage is 12kV and the rated working current is 1250A. Its buar system adopts single buar; however, the structure of single buar with bypass and the structure of dual buar can also be derived. The switchgear has the "five protection" interlocking function. Since it can be used in combination with ZN63 (VSI) vacuum circuit breaker or VD4 vacuum circuit breaker from ABB Group, it is the power distribution equipment with excellent performance. 

适用范围:

Scope of Application

主要适用于发电厂、中小型发电机送电、工矿企事业配电及电力系统的二次变电所受电、馈电及大型高压电动机启动等,实行控制保护、监测之用。

It is mainly used for the power transmission of power plants and medium- and small-sized generators, power distribution of industrial and mining enterprises and institutions, power receiving and feed of secondary substation of power system and start-up of large-sized HV motors, realizing the protection and monitoring functions.

标准:

Technical standards

KYN28-12内金属铠装移开式开关设备符合IEC298《额定电压1kV以上52kV及以下交流金属封闭开关设备和控制设备》、IEC694《高压开关控制设备共用条款》、我国GB3906《3.6-40.5kV交流金属封闭开关设备》、GB1984-2014《高压交流断路器》、GB1985-2014《高压交流隔离开关和接地开关》及DL404《户内交流高压开关柜订货条件》

KYN28-12 indoor metal armored withdrawable switchgear conforms to the following standards: IEC298 A.C. Metal-enclosed Switchgear and Controlgear for Rated Voltages Above 1kV and Up to and Including 52kV, IEC694 Common Specifications for High-voltage Switchgear and Controlgear, GB3906 Alternating-current Metal-enclosed Switchgear and Controlgear for Rated Voltages Above 3.6kV and Up to and Including 40.5kV, GB1984-2014 High-voltage Alternating-current Circuit Breakers, GB1985-2014 High-voltage Alternating-current Disconnectors and Earthing Switches, and DL404 Indoor AC High Voltage Switchgear panel.

工作环境:

Operating environment

l海拔高度:≤2000m,高于2000m应考虑降容运行

lAltitude: ≤2000m; operation with reduced capacity shall be considered above 2000m

l环境温度:

lAmbient temperature:

高气温: +40°C

Maximum air temperature: +40°C

价格适宜气温:-5 °C

Minimum air temperature: -5°C

l环境湿度:

lEnvironmental humidity:

日平均相对湿度:≤ 90%

Daily mean relative humidity: ≤ 90%

月平均相对湿度:≤ 90%

Monthly mean relative humidity: ≤ 90%

l安装环境:安装地点的倾斜度:<5°,且整组柜列相对平整

lInstallation environment: tilt at installation site: <5°, the whole row of cabinets erected relatively evenly

l耐地震能力:8 度

lSeismic resistance: M 8

产品参数:

Product Parameters

额定电压:12kV

Rated voltage: 12kV

额定电流:1250A

Rated current: 1250A

额定频率:50(60)Hz

Rated frequency: 50(60) Hz

额定短路开断电流:31.5kA

Rated short-circuit breaking current: 31.5kA

额定短路关合电流:80kA

Rated short-circuit making current: 80kA

防护等级:IP4X/IP2X

Protection grade: IP4X/IP2X

柜体尺寸:

Cabinet dimensions

额定电流

Rated current

高(mm)

Height (mm)

宽(mm)

Width (mm)

深(mm)

Depth (mm)


电缆下进出线

Cable down incoming and outgoing lines

架空进出线

Overhead incoming and outgoing lines




630A/1250A

2300

800

1500

1660

订货须知

Ordering Instructions

订货时用户应提供下列资料:

It is necessary for the user to provide the following information at the time of ordering:

1.一次回路方案及单线系统图;

1. Scheme and single wire system diagram of the primary circuit;

2.二次回路原理图或接线图;

2. Schematic diagram or wiring diagram of the secondary circuit;

3.断路器型号、名称及订货数量;

3. Model, name and quantity of ordered circuit breaker;

4.断路器额定电压、额定电流及额定短路开断电流;

4. Rated voltage, rated current, and rated short-circuit breaking current of circuit breaker;

5.额定操作电压;

5. Rated operating voltage;

6.备品、备件名称及数量;

6. Name and quantity of spare parts;

7.用户的其它特别要求;

7. User's other special requirements;


{ysseo:fcity}[field:citytitle/] {/ysseo:fcity}